Biochemical Incubator BI

Biochemical Incubator BI is suitable for BOD analysis of water body to determine the culture, preservation of bacteria, molds, microorganisms, plant cultivation, breeding experiments

Characteristics:
1.7.0 inch large touch screen, easy to understand, easy to operate, easy to observe.
2.SUS304 mirror stainless steel inner liner, four corners of the arc transition, the partition can be freely disassembled and adjustable height, easy to clean, keep the indoor environment clean.
3.The new air duct design ensures uniform temperature in the working room.
4.Each side of the box is equipped with a standard 36mm diameter test hole, which can be connected to the device as required.
5.Double-layer door design, large window of the outer door, convenient observation, in the working state, the opening and closing of the outer door will not affect the normal operation of the incubator, the standard mechanical door lock of the box i door. Prevent the door from opening and closing arbitrarily.
6.Low or high temperature alarm.
7.Precise temperature control system, small fluctuations, with timing function, the maximum time can be set to 9999 minutes.
8.It can be controlled by multiple segments, up to 30 segments can be set, and the maximum running time of each segment is 9999 minutes, which can simplify complex experiments.
9.Independent refrigeration circuit, the use of international imported brand compressor, environmental protection refrigerant (R134a), high efficiency and energy saving.
10.Dual refrigeration system can be used continuously for a long time.
11.The new automatic frost design, the defrosting temperature fluctuation is small.
12.With power failure recovery function, after the external power suddenly lost and called again, the device can continue to run according to the original set parameters.